BACK TO PRODUCT LINE PAGE   |  Français

 
Price Search        

 
   

WB9722-C
WALKER 600 ML. (20 FL. OZ.) BOTTLE


2.5” W x 10.5” H x 2.5” D

• Stainless Steel
• Double walled
• Square shaped
• Glossy exterior
• Silver screw on top lid and bottom base
• Holds up to 600 ml. (20 fl. oz.)
• BPA free and FDA compliant
• For hot and cold beverages
• Individually retail packaged

PAD 1C AQ HDAQ – 1.5” W x 1” H (side horizontal)
PAD 1C – 0.75” W x 3” H (side vertical)
LAS – 1.75” W x 4” H (side)
Imprinted price includes one colour imprint in one location or laser engraving in one location
WB9722-C-WALKER 600 ML. (20 FL. OZ.) BOTTLE-Black (Clearance Minimum 20 Units)
154 in stock
WB9722-C-WALKER 600 ML. (20 FL. OZ.) BOTTLE-Royal Blue (Clearance Minimum 20 Units)
221 in stock
WB9722-C-WALKER 600 ML. (20 FL. OZ.) BOTTLE-White (Clearance Minimum 20 Units)
143 in stock

Billable Sample
Due to the high cost or nature of this item, we will be invoicing your firm the end column no imprint cost when ordering a sample.
Origaudio and select Handstands samples will be considered one piece orders and products are billed at the imprinted column quantity pricing.
Billable samples are non-returnable and non-refundable. NOTE: All billable samples are subject to a freight charge.


Additional Colour/Location Decorating Costs for Screen Print, Transfer Print, Pad Print and/or Laser Engraving for Drinkware
Under 500 500 and over
Additional Color Additional Location Additional Color Additional Location
$0.80 $0.90 $0.60 $0.70
(4E)


Pad Printing (PAD 1C)
CANADA Set up charge $65.00 (G) each
USA Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

There is a maximum of 1 colour on this option. Pad Printing is extremely effective on rounded, uneven, or slanted product shapes. It is also perfect for small and intricate logos. A silicone pad is used to transfer the ink onto the product. The pad can hit various levels on a product at one time. Ink colour availability is restricted due to the limited ability to mix inks utilized in this process. Pad printing is utilized on products such as: plastics, pens, aluminum, tins, rubber, cardboard gift boxes, metal, vinyl, leather and paper pad banners.

Ink Change: All orders that require an ink colour change are subject to a charge of $35.00(E) per colour.


AQUA MARK (AQ)


- Spot Colour printing for Drinkware
- Minimum two colour imprint
CANADA Set up charges are $65.00(G) per colour/design
USA Set up charges are $60.00(G) per colour/design
Repeat set up charge: $30.00(G) each
Utilize imprinted price and add the following run charges:
$2.25(G)
Minimum 100 pieces
Absolute minimum 50 pieces with a less than minimum charge of $80.00(E)
If you require an Aqua Mark in a 2nd location, an additional location running charge (based on quantity-see pricing grid on this page) AND applicable Aqua Mark running charges will apply.
Similar to traditional transfer printing, Aqua Mark has been developed exclusively for use on drinkware. Ink is applied to a sheet of transfer paper instead of directly onto the material. The transfer is then applied directly onto the product. This method allows for spot colour separations (PMS colour match). A clear overlay is always required. A white underlay may be required on dark product colours or glass.
Hand wash recommended.
Ink Change: All orders that require an ink colour change are subject to a charge of $35.00(E) per colour.

HD AQUA MARK (HD AQ)

- Four colour process decorating for Drinkware
Set up charge $90.00(G)
Repeat set up charge $45.00(G)
Utilize imprinted price and add the following run charges: $2.25(G)
Minimum 100 pieces
Absolute minimum 50 pieces with a less than minimum charge of $80.00(E)
If you require a HD Aqua Mark in a 2nd location, an additional location running charge (based on quantity-see pricing grid on this page) AND applicable HD Aqua Mark running charge will apply. This decorating method combines four colour process HD Ready and Aqua Mark. You can print full colour logos on drinkware products that previously could only handle spot colour printing. A clear overlay is always required. PMS colour match not available.
Hand wash recommended.

Laser Engrave for Drinkware (LAS)
CANADA Set up charge $65.00 (G) each
USA Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

Imprinted price includes laser engraving in one location
Debco's Laser Engrave technique uses state of the art laser technology to aim the laser's optical system at a focal point. The energy delivered to this focal point is altered such that a lasting imprint is created, typically by vaporizing the surface coating. The result is a long-lasting decoration that is essentially etched into the surface of the object on which the laser is directed. Please note: available on select colours.


Personalized Laser Engrave for Drinkware
CANADA Set up charge $65.00 (G) each
USA Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

Utilize imprinted price and add the following run charge: $1.00 (G)
You can now easily personalize your drinkware item with laser engraving. Personalizations will be placed under the logo unless otherwise indicated. Personalized information must be submitted at the time of order entry in an Excel document with one name/title/number per cell. Please advise font size and font style (click here to see fonts available). Arial will be the default font if none specified. The same font and size must be used for the full order. Imprinted minimums must be respected. One location ONLY.
Personalization is not available for rush services.

Black (Clearance Minimum 20 Units)
Qty Available: 154
Royal Blue (Clearance Minimum 20 Units)
Qty Available: 221
White (Clearance Minimum 20 Units)
Qty Available: 143